The Procedure Used by Flood Damage Restoration Professionals for Cleaning and Drying Crawlspaces and Grade Slabs in Prairie Village, KS

Floods can result in serious damage to your Prairie Village, KS, home, both to its structure and to your belongings. In such a scenario, it will be important for you to hire a flood damage restoration firm to start cleanup work as soon as possible. Starting cleaning and restoration work early will help prevent further damage to your home and stop other problems such as mold growth from surfacing.

 

Today we will take a closer look into the procedure followed by restoration firms for cleaning and drying crawlspaces and grade slabs.

 

Cleaning and Drying Crawlspaces and Grade Slabs

 

Crawlspaces

Step I: Creating an Access Opening 

If the crawlspace lacks an access opening, water damage repair professionals will remove parts of the overlying flooring to create the required access.

If the flooring cannot be salvaged, its removal will help provide the necessary access opening.

 

Step II: Removal of Contaminants and Water

The next step consists of removing any solid contamination and remaining water from the ground under the building.

If a vapor retardant is already present, it will be left alone so that it can collect cleaning solutions and spent water as well as facilitate drying after the cleaning process finishes.

 

Step III: Use of Plastic Vapor Retardant

Any exposed ground inside the crawlspace will be covered using a plastic vapor retardant to reduce the chances of mold growth and the migration of moisture into your home.

Flood damage restoration professionals will try to make the vapor retardant watertight by overlapping multiple layers and sealing them together with adhesive or glue.

 

Step IV: Cleanup of Underlying Support Structure

After the placement of plastic vapor retardant, the underlying support structure (consisting of wooden subfloors, wooden floor joists, and foundation walls) will be cleaned and sanitized.

This will be followed by the application of an effective wood preservative to provide protection from insects that can destroy wood and fungi.

 

Grade Slabs

Concrete grade slabs work as barriers between the interior sections of your home and the ground. There are two steps in the cleanup procedure:

 

Step I: Using a Pressure Washer to Remove Contamination

As part of flood damage cleanup, professionals will remove gross contamination and mud from grade slabs and any adjacent building surfaces using a pressure washer.

The pressure washer will also apply a disinfectant cleaning solution to properly decontaminate the area.

 

Step II: Thoroughly Scrubbing and Cleaning the Entire Area

The area will be thoroughly scrubbed using brushes, rinsed with clear water, and then repeated to achieve the best results.

During the cleaning process, squeegees will be utilized to control the disinfectant solution and high-powered wet vacuums will be used to collect any residual cleaning solution.

 

If your home has been flooded and you’re searching for a flood damage restoration company to start cleanup work, you need to contact ServiceMaster DSI.

 

Our technicians have the required expertise to perform water damage cleanup as per industry standards to achieve optimal results.

Just give us a call on our emergency flood damage helpline at (800) 954-9444 and we will respond to your Prairie Village, KS, home to examine the extent of the water damage and begin restoration.

Leave a Reply

Your email address will not be published. Required fields are marked *