4 Reasons Why DIY Carpet Cleaning after Disasters in Overland Park, KS, Is a Bad Idea

Whether it be a flood or fire, disasters can wreck the carpets in your Overland Park, KS, home. There are plenty of resources online that claim you can perform carpet cleaning yourself after your carpets have been damaged but be wary; carpet cleaning after a disaster shouldn’t be your next DIY project. Instead, trust the carpet cleaning professionals at ServiceMaster DSI. Why shouldn’t you try and save your carpets yourself? We’ve got four reasons why DIY cleaning can be a disaster itself.

#1: Your Carpets Can Shrink

Did you know your carpets can shrink if not cleaned properly? Shrinkage is a common issue encountered by DIY carpet cleaning. Either too much water is used or water that’s too hot, both of which lead to shrinkage. This can also happen if natural carpet fibers aren’t cleaned properly.  Professional carpet cleaners identify the type of carpet you have, the best way to clean it, and ensure that the perfect amount of water and cleaner is used to prevent shrinkage.

 

#2: Faster Re-soiling

Have you ever cleaned your carpets only to find they seem to quickly become dirty again? This is another common issue DIY carpet cleaning professionals have seen, especially after a disaster. Re-soiling occurs when too much cleaning product is used. The residue left behind attracts dirt, making your carpets appear dirtier faster. Our patented capture-and-release technology ensures that we effectively remove the existing dirt and cleaning product from your carpets, helping them stay cleaner longer.

 

#3: Wicking

Wicking is when dirt is not completely removed from your carpet, and instead, clings to the tips of the fibers, becoming visible after the carpet has dried. This results in an ugly spot on the carpet, despite your best efforts. Professional carpet cleaners avoid this problem by:

 

  • Pre-vacuuming: Performing extensive pre-vacuuming using commercial grade vacuums allows for the complete removal of dry soil
  • Controlling Wicking: Using rinsing agents and encapsulation pre-conditioners to control wicking
  • Allowing Dwell-time: Allowing required dwell time so that pre-conditioner can provide the desired results
  • Using Agitation Tools: Using advanced agitation tools to loosen the soil from the carpet’s pile
  • Rinsing and Drying: Carrying out heavier rinsing and then performing speed drying, which allows for complete removal of remaining debris and ensures the carpet dries properly

 

#4: Rippling, Browning, and Stains

DIY carpet cleaning can also result in other problems such as rippling, browning, and stains.

 

Rippling or buckling in carpets can be caused when too much moisture is left in the carpets after cleaning, requiring it to then be re-stretched.

 

If there are cellulosic fibers in your carpet (commonly found in cotton, jute, and rayon) and the wrong carpet solution is used, your carpet can experience browning, leaving dingy spots on your carpet.

 

Stains can also occur if furniture comes in direct contact with freshly cleaned carpets.

 

These are all common issues we see in DIY carpet cleaning after disasters, and we take precautions to prevent them.

 

If your carpets have been damaged, don’t risk additional destruction by trying to clean them yourself. Instead, rely on the carpet cleaning professionals at ServiceMaster DSI. We’re experienced in large-scale disaster restoration and carpet cleaning after a disaster. We can return your home and carpets to their pre-loss condition.

 

For professional carpet cleaning services after a natural disaster in Overland Park, KS, contact ServiceMaster DSI at (816) 527-9412 or fill out a service request form online for immediate assistance!

 

Leave a Reply

Your email address will not be published. Required fields are marked *